Off-the-shelf wardrobes assume straight walls, level floors and flat ceilings. Many homes in Portugal have none of these: old Lisbon buildings with walls out of plumb, attic rooms with sloping ceilings, coastal houses in the Algarve with humid air. Fitted wardrobes are made for uneven walls, sloping ceilings and humid air alike.
Can fitted wardrobes be built around uneven walls?
Yes. The maker measures each wall at several heights and points, then draws the wardrobe to the real shape of the room. On site, the carcasses are set level and the gaps against the walls, floor and ceiling are closed with filler panels cut to fit. The result looks built-in, even when the room is not square.
Wardrobes under sloping ceilings
Under a sloping ceiling, the wardrobe follows the angle: tall sections where there is height, lower drawers or shelves where the ceiling drops. Doors can be cut to the slope so that no space is lost. Measuring the angle precisely on site is essential.
What is the best wardrobe material for a humid home?
Humidity can make some boards swell and doors warp. Discuss with your maker:
- Moisture-resistant boards for carcasses in rooms with higher humidity. At Crossline, we use moisture-resistant MDF and marine plywood.
- Sealed edges and finishes on all faces, not only the visible ones.
- Ventilation: a small gap behind the wardrobe when it stands against an outside wall, and ventilated doors or panels where needed.
- The cause of the humidity: if a wall has damp, it should be treated before the wardrobe is installed.
Plan the inside too
Hanging space, drawers, shoe storage, lighting and the height of each rail are easier to decide on drawings than on site. Bring a list of what you need to store.
Fitted wardrobes for uneven walls by Crossline
Crossline makes fitted and walk-in wardrobes in its own factory in Portugal, measuring on site and installing with its own team.
Send us a photo of your space.
Learn more about our carpentry, see finished projects in our portfolio or contact us.